10G SFP+ 10GBASE-T RJ45 30m Copper Module | 100% Compatible with Palo Alto Networks Firewall

10G SFP+ 10GBASE-T RJ45 30m Copper Module | 100% Compatible with Palo Alto Networks Firewall

OptiSolid 10G SFP+ 10GBASE-T RJ45 copper transceiver is specially programmed for full compatibility with Palo Alto Networks Firewall 10G SFP+ ports. It adopts 10GBASE-T copper transmission technology and standard RJ45 interface, featuring a built-in Realtek chip, delivering stable 10Gbps connectivity up to 30m over Cat5e/Cat6/Cat6a twisted-pair copper cables. It supports auto-negotiation (10G/1G/100M) and auto-MDI/MDI-X, fully plug-and-play with no Palo Alto compatibility warnings and no module pairing required. An ideal replacement for Palo Alto PAN-SFP-PLUS-T series modules in data centers, enterprise wiring closets and short-distance indoor deployment environments.

• ✅ 100% Plug & Play with All Palo Alto Networks Firewall 10G SFP+ Ports
• ✅ 10GBASE-T Standard, Compliant with IEEE 802.3ab, SFP+ MSA & SFF-8472
• ✅ RJ45 Interface, 30m Transmission Over Cat5e/Cat6/Cat6a Twisted-Pair Copper Cables
• ✅ Built-in Realtek Chip, Low Power Dissipation (≤2.5W) for Energy Efficiency
• ✅ Commercial Grade (0°C ~ 70°C), Suitable for Data Center & Enterprise Indoor Environments
• ✅ No "Unknown Module" Alerts in Palo Alto PAN-OS
• ✅ Full DOM/DDM (DDMI) Real-Time Monitoring Supported (SFF-8472 Compliant)
• ✅ RJ45 Connector, Compact & Hot-Pluggable SFP+ Form Factor
• ✅ High Reliability, MTBF Up to 5,000,000 Hours
• ✅ No Module Pairing Required, Direct Single Use Available
• ✅ Auto-Negotiation (10G/1G/100M) & Auto-MDI/MDI-X, Plug-and-Play

Important 10GBASE-T Copper Cable Notice

This is a 10G SFP+ 10GBASE-T RJ45 copper module, compliant with IEEE 802.3ab, SFP+ MSA, SFF-8431 and SFF-8472 standards. For full 10Gbps transmission up to 30m, Cat5e/Cat6/Cat6a twisted-pair copper cables are required; up to 100m is supported over Cat6a at 1Gbps. Cat5 or lower-grade cables will reduce transmission speed and distance. Fiber cables are not compatible. Supports auto-negotiation and auto-MDI/MDI-X for plug-and-play compatibility with Palo Alto PAN-OS. Note: For PA-5400 series devices, ensure SFP+ ports are configured correctly for 10Gbps operation and avoid improper port remapping.

Full Palo Alto Networks Firewall Compatibility List

Palo Alto Networks Firewall Series (10G SFP+ Port Equipped)

• PA-5400 Series (Ports 9-20 support SFP+ 10Gbps operation)
• PA-3000 Series, PA-7000 Series, PA-8000 Series with 10G SFP+ ports
• All Palo Alto Networks Firewall models with 10G SFP+ ports (compatible with all PAN-OS versions)

Technical Specifications

Typical Applications

• Short-distance 10G connections for Palo Alto Networks Firewall devices in data centers and enterprise wiring closets
• Reliable 10G links using Cat5e/Cat6/Cat6a copper cable infrastructure, suitable for indoor deployments
• Palo Alto Networks Firewall deployments requiring high-speed, short-distance connectivity (up to 30m) with cost-effective copper-based solutions
• Point-to-point 10G connections for Palo Alto Networks Firewall to switches, servers and network devices in data centers and enterprise indoor environments
• Upgrade and replacement for Palo Alto PAN-SFP-PLUS-T 10G SFP+ 10GBASE-T copper modules
• Data center and enterprise scenarios requiring stable operation with high-speed copper connectivity and auto-negotiation support

Legal Disclaimer

OptiSolid is an independent third-party optical transceiver company. We are not affiliated with, endorsed by, or sponsored by Palo Alto Networks. All brand names, trademarks and model numbers (including PAN-SFP-PLUS-T) are used only for compatibility demonstration.

Frequently Asked Questions

Q: Can I use this 10GBASE-T copper module alone with Palo Alto Networks Firewall?
A: Yes. No pairing required. Plug-and-play compatible with Palo Alto Networks Firewall 10G SFP+ ports, enabling stable 10Gbps transmission over Cat5e/Cat6 copper cables up to 30m.

Q: Will this show as an unknown device in Palo Alto PAN-OS?
A: No. It is fully programmed to avoid compatibility warnings and support normal monitoring in Palo Alto PAN-OS, including DOM/DDM data display.

Q: What copper cable do I need?
A: Cat5e/Cat6/Cat6a twisted-pair copper cables (RJ45) are recommended. 30m 10Gbps transmission is supported over Cat5e/Cat6, and up to 100m at 1Gbps over Cat6a. Cat5 or lower will reduce performance. Fiber cables are not compatible.

Q: Is there any note for deploying with Palo Alto Networks Firewall?
A: Yes. For PA-5400 series devices, ensure SFP+ ports are configured correctly for 10Gbps operation and avoid improper port remapping. Ensure the copper cable is properly terminated and keep the module away from strong electromagnetic interference.

Q: Is this module compatible with all Palo Alto Networks Firewall 10G SFP+ ports?
A: Yes, it is fully compatible with all Palo Alto Networks Firewall models featuring 10G SFP+ ports. Suitable for data centers, enterprise wiring closets, indoor deployments and other short-distance deployment scenarios.