10G SFP+ LR 1310nm 10km Single Mode | 100% Compatible with MikroTik

10G SFP+ LR 1310nm 10km Single Mode | 100% Compatible with MikroTik

OptiSolid 10G SFP+ LR transceiver is specially programmed for full compatibility with MikroTik 10G SFP+ ports. It transmits and receives data over duplex single-mode fiber, delivering stable 10Gbps connectivity up to 10km with 1310nm long wavelength. Fully plug-and-play with no MikroTik compatibility warnings, it is an ideal replacement for MikroTik S+1310LC10D series LR modules in commercial and enterprise environments.

• ✅ 100% Plug & Play with All MikroTik 10G SFP+ Devices
• ✅ 10GBASE-LR Standard, 1310nm DFB Laser Transmitter
• ✅ Stable 10Gbps Link Up to 10km Over OS2 Single Mode Fiber
• ✅ Commercial Temperature Range: 0°C ~ 70°C for Daily Use
• ✅ No "Unknown Module" Alerts in MikroTik RouterOS
• ✅ Full DOM/DDM (DDMI) Real-Time Monitoring Supported
• ✅ LC Duplex Connector, Compact & Hot-Pluggable
• ✅ Duplex Single-Mode Fiber Transmission, Compliant with IEEE 802.3ae
• ✅ Low Power Dissipation (<1W) for Energy Efficiency

Important Fiber Notice

This is a 10G SFP+ LR single-mode module. For full 10Gbps transmission up to 10km, OS2 9/125μm single-mode fiber is required, which complies with IEEE 802.3ae Clause 52 standards for 10GBASE-LR transmission. It uses duplex (2-fiber) transmission and does not require pairing with specific modules—just use another 10G SFP+ LR module on the opposite end. It is fully compatible with MikroTik RouterOS, supporting real-time monitoring and stable data transmission without compatibility errors.

Full MikroTik Compatibility List

MikroTik Routers

• CCR1036-8G-2S+, CCR1036-8G-2S+EM, CCR1072-1G-8S+, CCR2004-1G-4S+
• RB1100AHx4, RB3011UiAS-RM, RB4011iGS+RM, RB5009UG+S+IN

MikroTik Switches

• CRS326-24G-2S+RM, CRS317-1G-16S+RM, CRS309-1G-8S+RM
• CRS504-4XQ-IN, CRS508-4XQ-IN, CRS510-8XQ-IN
• All MikroTik switches with 10G SFP+ ports

Technical Specifications

Typical Applications

• Long-distance 10G connections between MikroTik devices (e.g., routers, switches) in enterprise and campus environments
• Inter-building and campus 10G links using single-mode fiber infrastructure
• MikroTik network deployments requiring high-speed, long-distance connectivity with reliable single-mode fiber
• Point-to-point 10G connections for medium-to-large enterprise networks and long-distance backhaul
• Upgrade and replacement for MikroTik S+1310LC10D LR modules

Legal Disclaimer

OptiSolid is an independent third-party optical transceiver company. We are not affiliated with, endorsed by, or sponsored by MikroTik. All brand names, trademarks and model numbers are used only for compatibility demonstration.

Frequently Asked Questions

Q: Can I use this LR module alone?
A: Yes. It uses duplex single-mode fiber transmission and can be used independently with another 10G SFP+ LR module on the opposite end—no specific pairing required.

Q: Will this show as an unknown device in MikroTik RouterOS?
A: No. It is fully programmed to avoid compatibility warnings and support normal monitoring in MikroTik RouterOS, including DOM/DDM data display.

Q: What fiber cable do I need?
A: OS2 9/125μm single-mode fiber is required for 10km 10Gbps transmission, compliant with IEEE 802.3ae standards. LC duplex connectors are required for proper connection.

Q: Is this hot-pluggable on MikroTik switches?
A: Yes, fully hot-pluggable; no power-off required for installation or removal, compatible with MikroTik hot-plug standards.

Q: Is this module compatible with all MikroTik 10G SFP+ ports?
A: Yes, it is fully compatible with all MikroTik devices featuring 10G SFP+ ports, including routers, switches and aggregation devices, with no additional configuration needed.