10G SFP+ SR 850nm 300m Multimode | 100% Compatible with MikroTik

10G SFP+ SR 850nm 300m Multimode | 100% Compatible with MikroTik

OptiSolid 10G SFP+ SR transceiver is specially programmed for full compatibility with MikroTik 10G SFP+ ports. It transmits and receives data over duplex multimode fiber, delivering stable 10Gbps connectivity up to 300m with 850nm short wavelength. Fully plug-and-play with no MikroTik compatibility warnings, it is an ideal replacement for MikroTik S+85DLC03D series SR modules in commercial and enterprise environments.

• ✅ 100% Plug & Play with All MikroTik 10G SFP+ Devices
• ✅ 10GBASE-SR Standard, 850nm VCSEL Laser Transmitter
• ✅ Stable 10Gbps Link Up to 300m Over OM3 Multimode Fiber; 400m Over OM4
• ✅ Commercial Temperature Range: 0°C ~ 70°C for Daily Use
• ✅ No "Unknown Module" Alerts in MikroTik RouterOS
• ✅ Full DOM/DDM (DDMI) Real-Time Monitoring Supported
• ✅ LC Duplex Connector, Compact & Hot-Pluggable
• ✅ Duplex Multimode Fiber Transmission, Compliant with IEEE 802.3ae
• ✅ Low Power Dissipation (<1W) for Energy Efficiency

Important Fiber Notice

This is a 10G SFP+ SR multimode module. For full 10Gbps transmission up to 300m, OM3 50/125μm multimode fiber is required; OM4 multimode fiber can extend the distance up to 400m. It uses duplex (2-fiber) transmission and does not require pairing with specific modules—just use another 10G SFP+ SR module on the opposite end. It is fully compatible with MikroTik RouterOS, supporting real-time monitoring and stable data transmission without compatibility errors.

Full MikroTik Compatibility List

MikroTik Routers

• CCR1036-8G-2S+, CCR1036-8G-2S+EM, CCR1072-1G-8S+, CCR2004-1G-4S+
• RB1100AHx4, RB3011UiAS-RM, RB4011iGS+RM, RB5009UG+S+IN

MikroTik Switches

• CRS326-24G-2S+RM, CRS317-1G-16S+RM, CRS309-1G-8S+RM
• CRS504-4XQ-IN, CRS508-4XQ-IN, CRS510-8XQ-IN
• All MikroTik switches with 10G SFP+ ports

Technical Specifications

Typical Applications

• Short-to-medium distance 10G connections between MikroTik devices (e.g., routers, switches) in office and enterprise environments
• Data center internal 10G links (rack-to-rack, floor-to-floor) using multimode fiber infrastructure
• MikroTik network deployments requiring high-speed, short-distance connectivity with cost-saving multimode fiber
• Point-to-point 10G connections for small-to-medium enterprise networks and office backhaul
• Upgrade and replacement for MikroTik S+85DLC03D SR modules

Legal Disclaimer

OptiSolid is an independent third-party optical transceiver company. We are not affiliated with, endorsed by, or sponsored by MikroTik. All brand names, trademarks and model numbers are used only for compatibility demonstration.

Frequently Asked Questions

Q: Can I use this SR module alone?
A: Yes. It uses duplex multimode fiber transmission and can be used independently with another 10G SFP+ SR module on the opposite end—no specific pairing required.

Q: Will this show as an unknown device in MikroTik RouterOS?
A: No. It is fully programmed to avoid compatibility warnings and support normal monitoring in MikroTik RouterOS, including DOM/DDM data display.

Q: What fiber cable do I need?
A: OM3 50/125μm multimode fiber is required for 300m 10Gbps transmission; OM4 multimode fiber can extend the distance to 400m. LC duplex connectors are required for proper connection.

Q: Is this hot-pluggable on MikroTik switches?
A: Yes, fully hot-pluggable; no power-off required for installation or removal, compatible with MikroTik hot-plug standards.

Q: Is this module compatible with all MikroTik 10G SFP+ ports?
A: Yes, it is fully compatible with all MikroTik devices featuring 10G SFP+ ports, including routers, switches and aggregation devices, with no additional configuration needed.