Industrial Grade 10G SFP+ LR 1310nm 10km | 100% Compatible with Palo Alto Networks Firewall

Industrial Grade 10G SFP+ LR 1310nm 10km | 100% Compatible with Palo Alto Networks Firewall

OptiSolid Industrial Grade 10G SFP+ LR transceiver is specially programmed for full compatibility with Palo Alto Networks Firewall 10G SFP+ ports. It adopts 1310nm DFB laser and 10GBASE-LR single-mode transmission technology, featuring a standard duplex LC (UPC) interface and built-in MAXIM chip, delivering stable 10Gbps connectivity up to 10km over 9/125μm OS1/OS2 single-mode fiber. As an industrial-grade module, it supports an ultra-wide operating temperature range of -40°C ~ 85°C, with enhanced EMC protection passing IEC 61000-4-2 electrostatic discharge (≥8kV) and IEC 61000-4-5 surge tests (≥1kV). Fully plug-and-play with no Palo Alto compatibility warnings and no module pairing required, it is an ideal replacement for Palo Alto PAN-SFP-PLUS-LR series modules in industrial data centers, outdoor industrial sites, power facilities, rail transit and long-distance cross-site networking.

• ✅ 100% Plug & Play with All Palo Alto Networks Firewall 10G SFP+ Ports
• ✅ 1310nm DFB Laser, 10km@OS1/OS2 Single-Mode Fiber (SMF)
• ✅ Built-in MAXIM Chip, Low Power Dissipation (≤1.5W) for Energy Efficiency
• ✅ Industrial Grade (-40°C ~ 85°C), Suitable for Harsh Industrial & Outdoor Environments
• ✅ No "Unknown Module" Alerts in Palo Alto PAN-OS
• ✅ Full DOM/DDM (DDMI) Real-Time Monitoring Supported (SFF-8472 Compliant)
• ✅ Duplex LC (UPC) Connector, Compact & Hot-Pluggable SFP+ Form Factor
• ✅ High Reliability, MTBF Up to 5,000,000 Hours
• ✅ No Module Pairing Required, Direct Single Use Available
  

Important 10GBASE-LR Industrial Grade Single-Mode Fiber Notice

This is an Industrial Grade 10G SFP+ LR 1310nm single-mode module. For full 10Gbps transmission up to 10km, 9/125μm OS1/OS2 single-mode fiber (duplex LC) is required. Multimode fiber is not compatible—it will cause severe signal loss and connection failure. This module undergoes 72-hour high-low temperature cycle testing (-40℃↔8℅) and 1000-hour high-temperature high-humidity aging testing (85℃/85%RH), with enhanced EMC protection for stable operation in harsh industrial environments. No pairing required—plug-and-play with Palo Alto PAN-OS. Note: For PA-5400 series devices, ensure SFP+ ports are configured correctly for 10Gbps operation and avoid improper port remapping.

Full Palo Alto Networks Firewall Compatibility List

Palo Alto Networks Firewall Series (10G SFP+ Port Equipped)

• PA-5400 Series (Ports 9-20 support SFP+ 10Gbps operation)
• PA-3000 Series, PA-7000 Series, PA-8000 Series with 10G SFP+ ports
• All Palo Alto Networks Firewall models with 10G SFP+ ports (compatible with all PAN-OS versions)

Technical Specifications

Typical Applications

• Long-distance 10G connections for Palo Alto Networks Firewall devices in industrial data centers and outdoor industrial sites
• Reliable 10G links using OS1/OS2 single-mode fiber, suitable for harsh industrial and outdoor long-distance deployments
• Palo Alto Networks Firewall deployments requiring high-speed, long-distance connectivity (up to 10km) with industrial-grade stability
• Point-to-point 10G connections for Palo Alto Networks Firewall to switches, servers and network devices in power facilities, rail transit and cross-site industrial environments
• Upgrade and replacement for Palo Alto PAN-SFP-PLUS-LR 10G SFP+ LR single-mode modules
• Industrial scenarios requiring stable operation in ultra-wide temperature environments (-40°C ~ 85°C) with high-speed single-mode connectivity

Legal Disclaimer

OptiSolid is an independent third-party optical transceiver company. We are not affiliated with, endorsed by, or sponsored by Palo Alto Networks. All brand names, trademarks and model numbers (including PAN-SFP-PLUS-LR) are used only for compatibility demonstration.

Frequently Asked Questions

Q: Can I use this industrial-grade LR module alone with Palo Alto Networks Firewall?
A: Yes. No pairing required. Plug-and-play compatible with Palo Alto Networks Firewall 10G SFP+ ports, enabling stable 10Gbps transmission over OS1/OS2 single-mode fiber up to 10km, even in harsh industrial environments (-40°C ~ 85°C).

Q: Will this show as an unknown device in Palo Alto PAN-OS?
A: No. It is fully programmed to avoid compatibility warnings and support normal monitoring in Palo Alto PAN-OS, including DOM/DDM data display.

Q: What single-mode fiber do I need?
A: 9/125μm OS1/OS2 single-mode fiber (duplex LC) is required for full 10km 10Gbps transmission. Multimode fiber is not compatible and will cause severe signal loss and connection failure.

Q: Is this module compatible with all Palo Alto Networks Firewall 10G SFP+ ports?
A: Yes, it is fully compatible with all Palo Alto Networks Firewall models featuring 10G SFP+ ports. Suitable for industrial data centers, outdoor industrial sites, power facilities, rail transit and other harsh environment long-distance deployment scenarios.