Industrial Grade 10G SFP+ SR 850nm 300m | 100% Compatible with Ubiquiti UniFi

Industrial Grade 10G SFP+ SR 850nm 300m | 100% Compatible with Ubiquiti UniFi

OptiSolid Industrial Grade 10G SFP+ SR transceiver is specially programmed for full compatibility with Ubiquiti UniFi 10G SFP+ ports. It transmits and receives data over duplex multi-mode fiber, delivering stable 10Gbps connectivity up to 300m with 850nm short wavelength. Featuring industrial-grade temperature resistance, it is fully plug-and-play with no UniFi compatibility warnings, making it an ideal replacement for Ubiquiti UF-MM-10G series SR modules in harsh industrial and commercial environments.

• ✅ 100% Plug & Play with All Ubiquiti UniFi 10G SFP+ Devices
• ✅ 10GBASE-SR Standard, 850nm VCSEL Laser Transmitter
• ✅ Stable 10Gbps Link Up to 300m Over OM3 Multi-Mode Fiber; 400m Over OM4
• ✅ Industrial-Grade Temperature Range: -40°C ~ 85°C for Harsh Environments
• ✅ No "Unknown Module" Alerts in UniFi Network Controller
• ✅ Full DOM/DDM Real-Time Monitoring Supported
• ✅ LC Duplex Connector, Compact & Hot-Pluggable
• ✅ Duplex Multi-Mode Fiber Transmission, Compliant with IEEE 802.3ae
• ✅ Low Power Dissipation (<1W) for Energy Efficiency

Important Fiber Notice

This is an industrial-grade 10G SFP+ SR multi-mode module. For full 10Gbps transmission up to 300m, OM3 50/125μm multi-mode fiber is required; OM4 multi-mode fiber can extend the distance up to 400m. It uses duplex (2-fiber) transmission and does not require pairing with specific modules—just use another 10G SFP+ SR module (industrial or commercial grade) on the opposite end. It is designed to withstand harsh industrial environments with wide temperature adaptability (-40°C ~ 85°C).

Full UniFi Compatibility List

UniFi Gateways

• UDM Pro, UDM Pro SE, UDM SE, UXG-Pro

UniFi Switches

• USW-Enterprise-XG-6POE, USW-Enterprise-XG-24
• USW-Aggregation, USW-Aggregation-Pro, USW-Pro-Aggregation
• US-16-XG-150W, US-48-XG-750W
• All UniFi switches with 10G SFP+ uplink ports

Technical Specifications

Typical Applications

• Short-to-medium distance 10G connections between UniFi devices in industrial environments (e.g., factories, warehouses)
• Data center internal 10G links (rack-to-rack, floor-to-floor) using multi-mode fiber infrastructure
• Industrial UniFi network deployments requiring wide temperature resistance (-40°C ~ 85°C)
• Point-to-point 10G connections for industrial control systems and harsh-environment networks
• Upgrade and replacement for Ubiquiti UF-MM-10G SR modules in industrial scenarios

Legal Disclaimer

OptiSolid is an independent third-party optical transceiver company. We are not affiliated with, endorsed by, or sponsored by Ubiquiti Inc. All brand names, trademarks and model numbers are used only for compatibility demonstration.

Frequently Asked Questions

Q: Can I use this industrial-grade SR module alone?
A: Yes. It uses duplex multi-mode fiber transmission and can be used independently with another 10G SFP+ SR module (industrial or commercial grade) on the opposite end—no specific pairing required.

Q: Will this show as an unknown device in UniFi Controller?
A: No. It is fully programmed to avoid compatibility warnings and support normal monitoring in UniFi Network Controller.

Q: What fiber cable do I need?
A: OM3 50/125μm multi-mode fiber is required for 300m 10Gbps transmission; OM4 multi-mode fiber can extend the distance to 400m. LC duplex connectors are required for proper connection.

Q: Is this hot-pluggable on UniFi switches?
A: Yes, fully hot-pluggable; no power-off required for installation or removal, compatible with UniFi hot-plug standards.

Q: What is the difference between industrial-grade and commercial-grade SR modules?
A: The main difference is the operating temperature range. Industrial-grade modules support -40°C ~ 85°C, making them suitable for harsh environments such as factories, outdoor cabinets, and warehouses, while commercial-grade modules typically support 0°C ~ 70°C for standard indoor use.